Use: applied in bridge systems to hold products on the conveyor belts, it allows fastening guide pins or blades creating one or more tracks. It is used as sliding element to adjust the product size. It is also suitable to align/separate products at the end of the line in preparation for packaging. It allows horizontal or vertical adjustment of the product containment guides.
State of supply aluminium clamp; 2 UNI 5931 socket head screws (see table, S1), 1 UNI 5931 socket head screw (see table, S2), 2 M8 hexagon nuts in galvanised steel; 1 ratchet lever and screw cap in reinforced polyamide, threaded pin and washer in galvanised steel.
Characteristics: greater lateral thrust resistance of high loads or accidental impact.
Standard pack: 8 pieces.
Tightening torque 25 Nm (M8).
|Order code||D1 mm||D1 Ø||D2 Ø||S1||S2||Finish||Weight kg||Stock||€ piece||Buy||Draw|
|687018||40||42.4||20||M8x20||M8x40||painted in grey RAL7010||0.51||79,10|
|687028||40||42.4||20||M8x20||M8x40||painted in grey RAL9006||0.51||79,10|
Products not in stock minimum order 8 pieces, delivery in 16 days (unless stock runs out).