Cross-type60/50Ø with reinforced pedestal on the ground

Use: Support adjustable on 2 axes with handwheel on worm screw for frequent adjustments for marking units.

State of supply 2 nickel-plated steel columns (electrolytic nickel-plating), trapeze screws and lead nuts in phosphated steel, brass sliding bearings, 1 aluminium carriage, 2 handwheels and 2 levers in reinforced polyamide, 1 steel pedestal, 4 polyamide feet with galvanised steel stem, wheels in polyurethane (outer ring) and polyamide (core) depending on the version (see table), galvanised steel nuts and bolts.

Characteristics: Tr20 worm screw, pitch 4 (1 handwheel turn = 4 linear mm). Pedestal adjustable in height for handling with transpallets.

Positioning accuracy: ±0.3 mm/300mm*.

Operation: STEP-BY-STEP (NO continuous operation).

Max. 70 rpm; max time: 1 (min; on/off ratio=1/10 (max 10%).

Tightening torque 50Ø = 35 Nm; 60Ø = 50 Nm

Millimetre scale marking p. .

WARNINGS

* the ACCURACY indicated is theoretical. Accuracy levels depend on the actual conditions of use and are affected by the accuracies of the kinematic chain - consisting of the handwheel/crank handle/revolution counter kit or any connection joints - and by the performance of the position control system (encoder, etc.).