Ø50 idle roller

2722

Use: for construction of gravity or thrust idle roller units.

Material galvanised steel or PVC roller (see table), bearing heads in black polyamide, yellow polypropylene cover.

State of supply assembled rollers.

Characteristics: quick to replace, to be screwed onto the pitch drilled side.

Operating temperature

- galvanised steel rollers: -5°C ÷ +80°C

- PVC rollers: -5°C ÷ +50°C

QUANTITY DISCOUNT

Qty	20+	40+
Discounts	-	contact us

Order code	Pack	S mm	C mm	Load capacity (kg) Static	Load capacity (kg) Dynamic	Material	Weight kg	Stock	€ piece	Buy	Draw
602425	20 pcs	1.5	360	129	73	galvanised steel	0.949		58,56
616175	20 pcs	2.8	360	20	55	PVC	0.411		63,22
602435	20 pcs	1.5	410	119	73	galvanised steel	1.069		59,61
616185	20 pcs	2.8	410	20	50	PVC	0.461		64,15
602445	20 pcs	1.5	460	115	73	galvanised steel	1.189		60,64
616195	20 pcs	2.8	460	20	50	PVC	0.511		65,11
602455	20 pcs	1.5	510	102	73	galvanised steel	1.309		61,73
616205	20 pcs	2.8	510	20	28	PVC	0.561		66,06
602465	20 pcs	1.5	560	92	73	galvanised steel	1.429		62,76
616215	20 pcs	2.8	560	19	16	PVC	0.611		66,97
602475	20 pcs	1.5	610	84	73	galvanised steel	1.549		63,80
616225	20 pcs	2.8	610	12	16	PVC	0.661		67,94
617115	20 pcs	1.5	660	80	73	galvanised steel	1.669		64,87
617125	20 pcs	2.8	660	10	16	PVC	0.711		68,90
617135	20 pcs	1.5	710	71	73	galvanised steel	1.789		65,91
617145	20 pcs	2.8	710	7	10	PVC	0.761		69,86
617155	20 pcs	1.5	760	67	73	galvanised steel	1.909		66,95
617165	20 pcs	2.8	760	6	10	PVC	0.811		70,80
617745	20 pcs	1.5	810	62	73	galvanised steel	2.029		68,02
617755	20 pcs	2.8	810	5	7	PVC	0.861		71,77
Customisations: lengths shorter (min C=200 mm) and greater than 810 are available only in galvanised steel versions (max 1600 mm).

Products not in stock minimum order 20 pieces, delivery in 20 days (unless stock runs out).