Use: for drive on the first axis of the linear guide.
Material aluminium heads and pulley, stainless steel pulley cover, ABS idler unit cover, aluminium flange, stainless steel shafts, galvanised steel nuts and bolts.
State of supply complete with 1 head with bearings, 1 pulley, 2 pulley protection covers, 1 flange for gearmotor with shaft and protection cover, 1 transmission shaft with tab, 2 pulleys, 1 tensioner, 1 toothed transmission belt, 4 DIN 7984 M8x20 screws with square nuts for fastening to the beam.
Technical characteristics: 1 turn of the pulley = 200 mm travel of the conveyor belt.
Transmission ratio 1:1.
Standard pack: 1 piece.
|Order code||Motor drive||Belt compatible||Nominal torque transmissible||Finishing head||Weight kg||Stock||€ piece||Buy||Draw|
|692787||RH||AT10/25||21 Nm||painted RAL9006||3.45||746,35|
|692797||LH||AT10/25||21 Nm||painted RAL9006||3.45||746,35|
|692807||RH||T10/25||21 Nm||painted RAL9006||3.45||746,35|
|692817||LH||T10/25||21 Nm||painted RAL9006||3.45||746,35|
Products not in stock minimum order 1 piece, delivery in 20 days (unless stock runs out).