Use: supplementary legs, ideal for making an existing fixed bench height adjustable for an ergonomic position.
State of supply complete with 1 black crank, 1 cylinder power pump with revolution counter, 4 X 4 metre rolls of hose for hooking up the cylinders, 1 flask of hydraulic fluid of the same type with which the pump is filled, to enable proper hydraulic hookup with hoses and cylinders, 4 cylinders, 4 adjustable feet with M8 shank and non-slip foot, 4 brackets for mounting the cylinders to the bench, 4 drilled aluminium profile members for connecting the legs with the feet, 8 end caps complete with M5x20 socket head nuts and bolts in galvanised steel, 4 M8 square nuts with spring, 4 M8 square nuts, 4 DIN 7984 M8X16 screws, 4 M8x43 safety screws, 8 M8 nuts for adjusting the height of the feet, 4 45x45 end caps, 16 washers.
Characteristics: manual drive pump.
Operation: max time: 2 min, minimum holding time 8 min (25%).
Warning: each hose must be cut to the same length (max 4 m).
|Order code||Pack||Travel C mm||CA mm||CB mm||PA mm||PB mm||Max. load N||Weight kg||Stock||€ piece||Buy||Draw|
Products not in stock minimum order: 1 kit, delivery 20 days (unless stock runs out).