Use: unit adjustment and positioning change with medium to light loads, sliding carriage movement.
Compared to the version with 1 carriage, this version offers a larger bracketing surface.
Suitable for both horizontal and vertical use.
State of supply heads and carriages in aluminium, carriage connection plate in anodised aluminium, sliding columns in C45 chrome-plated steel, steel trapeze screw, brass lead nut, galvanised steel nuts and bolts, column end caps in thermoplastic material.
worm screw, Tr 14 pitch 4 (1 turn = 4 linear mm)
Standard pack: 1 piece.
The carriage driving screw must be regularly lubricated with grease or adhesive lubricant. Do not use dry.
Operation: STEP-BY-STEP (NO continuous operation).
Max 120 rpm; max time: 1 min; on/off ratio=1/30
|Order code 1 pin||2 pins||LG mm||C mm||F screw||Finishing heads and carriage||Weight kg||Stock||€ piece||Buy||Draw|
|T3012A0330N||T3012A0330N2P||330||100||TR14x4||painted in RAL9005 black||3.80||323,54|
|T3012A0480N||T3012A0480N2P||480||250||TR14x4||painted in RAL9005 black||4.35||343,70|
|T3012A0780N||T3012A0780N2P||780||550||TR14x4||painted in RAL9005 black||5.50||379,77|
|Customised travel C and length LG (min 280 mm; max 1730 mm); on request, carriages and heads may be supplied painted in other colours. Versions for wet environments (worm screw and columns with chemical nickel-plating treatment and nuts and bolts in stainless steel) are available on request.|
Products not in stock minimum order: 1 piece, delivery in 15 days (unless stock runs out) for shot peened versions (see table), delivery in 20 days for other lengths (LG) and painted versions.