Use: unit adjustment and positioning change with medium to light loads, sliding carriage movement.
Suitable for both horizontal and vertical use.
State of supply Heads and carriage in aluminium, sliding columns in C45 chrome-plated steel, steel trapeze screw, brass lead nut, galvanised steel nuts and bolts, column end caps in thermoplastic material.
worm screw, Tr 14 pitch 4 (1 turn = 4 linear mm)
Standard pack: 1 piece.
The carriage driving screw must be regularly lubricated with grease or adhesive lubricant. Do not use dry.
Operation: STEP-BY-STEP (NO continuous operation).
Max 120 rpm; max time: 1 min; on/off ratio=1/30
|Order code 1 pin||2 pins||LG mm||C mm||F screw||Finishing heads and carriage||Weight kg||Stock||€ piece||Buy||Draw|
|T3011A0250N||T3011A0250N2P||250||100||TR14x4||painted in RAL9005 black||2.80||241,70|
|T3011A0400N||T3011A0400N2P||400||250||TR14x4||painted in RAL9005 black||3.35||261,75|
|T3011A0700N||T3011A0700N2P||700||550||TR14x4||painted in RAL9005 black||4.46||300,74|
|Customisations Travel C and length LG (min 200 mm; max 1650 mm); on request, carriages and heads may be supplied painted in other colours. Versions for wet environments (worm screw and columns with chemical nickel-plating treatment and nuts and bolts in stainless steel) are available on request.|
Products not in stock minimum order: 1 piece, delivery in 15 days (unless stock runs out) for shot peened versions (see table), delivery in 20 days for other lengths (LG) and painted versions.