Use: for linear sliding on drawn or ground shafts with possibility of adjusting the clearance on the shaft; it allows lock joining 35mm wide flat bars.
Material aluminium bush, 1 polyamide anti-friction bushing, 1 DIN 7984 M8 socket head screw, 1 M8 washer, 1 galvanised steel torque limiter and 1 polyamide screw cap.
Characteristics: anti-friction bushing insensitive to dust and dirt, resistant to corrosion and abrasion, silent, with possibility of using it on not hardened shafts, operating temperature: +90°C to -50°C, friction coefficient 0.08 - 0.18 µ, The limit switch prevents the bushings from locking on the shaft.
Standard pack: 4 pieces.
|Order code||D1 Ø||Tolerance||Max. load dynamic (N)||Max. load static (N)||Finishing||Weight g||Stock||€ piece||Buy||Draw|
|600767||4 pcs||+0.04 +0.085||3420||2400||shot peening||288||92,73|
|Customisations Other finishes on request.|
Products not in stock minimum order 4 pieces, delivery in 20 days (unless stock runs out).