Use: for linear sliding on drawn or ground shafts with possibility of adjusting the clearance on the shaft; it allows application of customised flanges.
Material aluminium bush, 1 polyamide anti-friction bushing, 1 DIN 7984 M8 socket head screw, 4 UNI 5931 M5 socket head screws, 1 M8 washer, 1 galvanised steel torque limiter and 1 polyamide screw cap.
Characteristics: anti-friction bushing insensitive to dust and dirt, resistant to corrosion and abrasion, silent, with possibility of using it on not hardened shafts, operating temperature: +90°C to -50°C, friction coefficient 0.08 - 0.18 µ, The limit switch prevents the bushings from locking on the shaft.
Standard pack: 4 pieces.
|Order code||D1 Ø||Tolerance||L||Max. load dynamic (N)||Static load max (N)||Finishing||Weight g||Stock||€ piece||Buy||Draw|
|600747||4 pcs||+0.04 +0.085||62||2650||18400||shot peening||277||97,39|
|602447||4 pcs||+0.04 +0.085||68||3420||24000||shot peening||277||99,16|
|Customisations Other finishes on request.|
Products not in stock minimum order 4 pieces, delivery in 15 days (unless stock runs out).