Use: for opposed guides, the runner rollers rest in the V-shaped seat of the guide.
Material aluminium guide; M6x16 countersunk head screws and M6 square nuts in galvanised steel (only for pre-drilled version).
State of supply version with fastening holes complete with M6x16 countersunk head screws and M6 nuts Part 802.
Characteristics: to be used when you want to prevent chips or other material from getting stuck in the guides hindering roller sliding.
Standard pack: 2 bars.
|Order code||L||with fastening holes||Centring element for groove||Nuts and bolts||Finishing||Weight kg/m||Stock||€ bar||Buy||Draw|
|622739||2 x 6 m||no||yes||without nuts and bolts||anodised 15 µm||0.95||174,42|
|622749||2 x 6 m||yes||yes||Screws and nuts||anodised 15 µm||0.95||215,94|
|683883||2 x 6 m||no||no||without nuts and bolts||anodised 15 µm||0.95||193,14|
|683913||2 x 6 m||yes||no||screws only||anodised 15 µm||0.95||241,38|
Products not in stock minimum order: 12 metres, delivery in 5 days (unless stock runs out).