Double-sided adhesive tape

Use: allows the fastening profiles to be secured on the tubes when fastening by means of rivets is not recommended (in the case of water that may infiltrate into the tubes).

State of supply 1 55 m roll, 25 thickness, 12 mm width.

Characteristics: the double-sided adhesive tape does not require setting times.

Standard pack: 1 roll.

Use denatured alcohol to carefully degrease the tube and the fastening profile that will come in contact with the double-sided adhesive tape.

Lay the double-sided adhesive tape on the tube where you will apply the fastening profile, remove the film and position the fastening profile manually pressing on all the areas where the adhesive tape has been applied.