Quality Italian Components
Handbook 2

Preassembled linear unit kit D20 with single upper carriage

HGMD

Preassembled linear unit kit D20  with single upper carriage

Material sliding shafts and rollers in hardened, ground and chrome-plated Cf53 steel (on request AISI431 stainless steel); profile, heads and carriage in silver-coloured anodised aluminium polyurethane belt with steel cables; galvanised steel nuts and bolts.

Technical characteristics

- Maximum carriage speed: 3 m/s*;

- Maximum carriage acceleration: 12 m/s^2*;

- Theoretical accuracy: ±0.1 mm**;

- 1 pulley turn: 200 mm.

Standard pack: 1 piece.

WARNINGS

* The maximum speed and acceleration indicated are approximate and to be checked case by case.

** the ACCURACY indicated is theoretical. The effective accuracy depends on the actual conditions of use and should take into account the accuracies of the kinematic chain - consisting of the reduction gear, motor, any connection joints - and by the performance of the position control system (encoder, etc.).

Combinations

Product Gallery

QUANTITY DISCOUNT

Qty 1+ 3+
Discounts - contact us
Order code LT mm L mm C mm Cx N Cy N Cz N Mx Nm My Nm Mz Nm Weight kg Stock piece Buy Draw
HGMD416A0500 700 500 160 650 600 1200 40 60 110 18.2 1.866,88
HGMD416A0600 800 600 260 650 600 1200 40 60 110 19.8 1.918,01
HGMD416A0700 900 700 360 650 600 1200 40 60 110 21.4 1.969,14
HGMD416A0800 1000 800 460 650 600 1200 40 60 110 23.0 2.020,25
HGMD416A0900 1100 900 560 650 600 1200 40 60 110 24.6 2.071,37
HGMD416A1000 1200 1000 660 650 600 1200 40 60 110 26.2 2.122,52
HGMD416A1100 1300 1100 760 650 600 1200 40 60 110 27.8 2.173,63
HGMD416A1200 1400 1200 860 650 600 1200 40 60 110 29.4 2.224,76
HGMD416A1300 1500 1300 960 650 600 1200 40 60 110 30.9 2.275,89
HGMD416A1400 1600 1400 1060 650 600 1200 40 60 110 32.5 2.327,01
HGMD416A1500 1700 1500 1160 650 600 1200 40 60 110 34.1 2.378,15
HGMD416A1600 1800 1600 1260 650 600 1200 40 60 110 35.7 2.429,26
HGMD416A1700 1900 1700 1360 650 600 1200 40 60 110 37.3 2.480,40
HGMD416A1800 2000 1800 1460 650 600 1200 40 60 110 38.9 2.531,51
HGMD416A1900 2100 1900 1560 650 600 1200 40 60 110 40.5 2.582,64
HGMD416A2000 2200 2000 1660 650 600 1200 40 60 110 42.1 2.633,77
HGMD416A2100 2300 2100 1760 650 600 1200 40 60 110 43.6 2.684,88
HGMD416A2200 2400 2200 1860 650 600 1200 40 60 110 45.2 2.736,02
HGMD416A2300 2500 2300 1960 650 600 1200 40 60 110 46.8 2.787,15
HGMD416A2400 2600 2400 2060 650 600 1200 40 60 110 48.4 2.838,27
HGMD416A2500 2700 2500 2160 650 600 1200 40 60 110 50.0 2.889,41
HGMD416A2600 2800 2600 2260 650 600 1200 40 60 110 51.6 2.940,52
HGMD416A2700 2900 2700 2360 650 600 1200 40 60 110 53.2 2.991,67
HGMD416A2800 3000 2800 2460 650 600 1200 40 60 110 54.8 3.042,78
HGMD416A2900 3100 2900 2560 650 600 1200 40 60 110 56.4 3.093,89
HGMD416A3000 3200 3000 2660 650 600 1200 40 60 110 57.9 3.145,03
Customisations LT, L and C (L: min 500 mm - max 6000 mm), shafts and rollers in stainless steel

 Products not in stock minimum order 1 piece, delivery in 15 days (unless stock runs out).