Quality Italian Components
Handbook 2

20 single guide

LG00S20

Use: when you need to increase or reduce the distance between guide centres, when you need clearance between the 2 guides, or when you need to fit the guides inwards.

Material sliding shaft in hardened, chrome-plated and ground CF53 steel or in hardened and ground AISI 431 stainless steel; aluminium profile.

Characteristics: tolerance on the diameter h7. Tolerance on the cut ±1 mm.

Standard pack: 1 piece.

Customisations guide length (L = max 6000 mm), minimum order: 1 piece, delivery in 15 days.

Combinations

Product Gallery

QUANTITY DISCOUNT

Qty 1+ 2+ 4+ 8+
Discounts - -5% -10% contact us
Order code L mm Material shaft Finishing profile Weight kg Stock piece Buy Draw
LG00S20A0300 300 steel anodised 0.94 25,82
LG00S20A0500 500 steel anodised 1.56 36,91
LG00S20I0500 500 steel anodised 1.50 53,63
LG00S20A0600 600 steel anodised 1.87 44,29
LG00S20A0685 685 steel anodised 2.13 50,56
LG00S20A0700 700 steel anodised 2.18 51,68
LG00S20A0800 800 steel anodised 2.50 59,04
LG00S20A1000 1000 steel anodised 3.12 73,82
LG00S20A1100 1100 steel anodised 3.432 81,19
LG00S20A1500 1500 steel anodised 4.68 110,73
LG00S20A2000 2000 steel anodised 6.24 147,50
LG00S20A2500 2500 steel anodised 7.8 184,55
LG00S20A3000 3000 steel anodised 9.36 221,45
LG00S20A3500 3500 steel anodised 10.92 258,37
LG00S20A4000 4000 steel anodised 12.48 295,27
LG00S20A4500 4500 steel anodised 14 332,18
LG00S20A5000 5000 steel anodised 15.6 369,09
LG00S20A5500 5500 steel anodised 17.16 406,00
LG00S20A6000 6000 steel anodised 18.72 442,89

 Products not in stock minimum order 1 piece, delivery in 10 days (unless stock runs out).