Quality Italian Components
Handbook 2

10 single guide

LG00S10

10 single guide

Use: when you need to increase or reduce the distance between guide centres, when you need clearance between the 2 guides, or when you need to fit the guides inwards.

Material sliding shaft in hardened, chrome-plated and ground CF53 steel or in hardened and ground AISI 431 stainless steel; aluminium profile.

Characteristics: tolerance on the diameter h7. Tolerance on the cut ±1 mm.

Standard pack: 1 piece.

Customisations guide length (L = max 6000 mm), minimum order: 1 piece, delivery in 15 days.

Combinations

Product Gallery

QUANTITY DISCOUNT

Qty 1+ 2+ 4+ 8+
Discounts - -5% -10% contact us
Order code L mm Material shaft Finishing profile Weight kg Stock piece Buy Draw
LG00S10A0300 300 steel anodised 0.318 12,21
LG00S10A0500 500 steel anodised 0.53 20,35
LG00S10A0600 600 steel anodised 0.636 24,43
LG00S10A0685 685 steel anodised 0.726 27,89
LG00S10A1000 1000 steel anodised 1.06 41,51
LG00S10A1100 1100 steel anodised 1.166 44,77
LG00S10A1500 1500 steel anodised 1.59 61,11
LG00S10A2000 2000 steel anodised 2.12 81,40
LG00S10A2500 2500 steel anodised 2.65 101,76
LG00S10A3000 3000 steel anodised 3.18 122,12
LG00S10A3500 3500 steel anodised 3.71 142,45
LG00S10A4000 4000 steel anodised 4.24 162,81
LG00S10A4500 4500 steel anodised 4.77 183,16
LG00S10A5000 5000 steel anodised 5.3 203,51
LG00S10A5500 5500 steel anodised 5.83 223,87
LG00S10A6000 6000 steel anodised 6.36 244,21

 Products not in stock minimum order 1 piece, delivery in 10 days (unless stock runs out).