Quality Italian Components
Handbook 2

C-shaped guide kit with 7Ų steel rods

4734

C-shaped guide kit with 7Ų steel rods

Use: for construction of sliding elements.

State of supply 1 15 µm anodised aluminium guide, AISI 304 stainless steel rods, 1 aluminium runner, 2 concentric grooved rollers, 1 eccentric grooved roller, 3 washers for M6 screw, 3 UNI5588 M6 hexagonal nuts, 2 polyamide end caps, 4 M5x20 socket head screws. Only for the version with fastening holes: complete with M6x16 hex. socket countersunk head screws and M6 square nuts Part. 802.

Characteristics: The central roller with cam allows offsetting any clearance between the seat and the side rollers (in vertical assembly, the 2 side rollers bear the load, while the central one is only used to recover the clearance).

Standard pack: 1 piece.

Warnings: should be preferentially used in the place of runners with polyamide bearings Part 2054 for construction of large and heavy doors (glass buffer) and for applications that require horizontal fitting (e.g. sliding tunnels). The runners must always be used in pairs.

Combinations

Product Gallery

QUANTITY DISCOUNT

Qty 1+ 2+ 4+ 8+
Discounts - -10% -17% contact us
Order code Version with fastening holes Centring element for groove Weight kg Stock piece Buy Draw
4734N3000C 1 pcs Yes 5.0 271,29
4734F3000C Yes Yes 5.0 292,80
4734F3000S Yes no 4.85 306,14

 Products not in stock minimum order 1 piece, delivery in 10 days (unless stock runs out).