Bett Sistemi will be taking a Summer break from 13/08/2018 to 26/08/2018

Quality Italian Components
Handbook 2

Double guide D12 provision for end-of-travel sensors

LG00D12

Double guide D12 provision for end-of-travel sensors

Use: the guide is ready for installation; only requires drilling a hole for fastening to the structure using the notch in the middle of the profile. It does not require lubrication nor maintenance.

Material sliding shafts in hardened, chrome-plated and ground CF53 steel or in hardened and ground AISI 431 stainless steel; aluminium profile.

Characteristics: tolerance on the diameter h7; steel bar parallelism tolerance: 0.03 mm/m; tolerance on the cut: ±1 mm.

Standard pack: 1 piece.

Combinations

Product Gallery

QUANTITY DISCOUNT

Qty 1+ 2+ 4+ 8+
Discounts - -5% -10% contact us
Order code L mm Material shafts Finishing profile Weight kg Stock piece Buy Draw
LG00D12A1000 1000 steel anodised 15 µm 3.8 180,36
LG00D12A1500 1500 steel anodised 15 µm 5.7 204,45
LG00D12A2000 2000 steel anodised 15 µm 7.6 238,90
LG00D12A2500 2500 steel anodised 15 µm 9.5 273,59
LG00D12A3000 3000 steel anodised 15 µm 11.4 308,66

 Products not in stock minimum order 1 piece, delivery in 5 days (unless stock runs out).