Quality Italian Components
Handbook 2

C-shaped guide kit with frictionable carriage

4732

C-shaped guide kit with frictionable carriage

Use: to construct friction sliding assemblies.

State of supply 1 15 μm anodised aluminium guide, 1 high-density polyethylene runner, 2 M8 special wide-head screws in stainless steel, 1 M8x16 countersunk head screw, 2 M8 washers and 3 M8 square nuts in galvanised steel, 2 brass spacers, 2 polyamide end caps, 4 M5x20 socket head screws in galvanised steel. Only for the version with fastening holes: complete with M6x16 hex. socket countersunk head screws and M6 square nuts Part. 802.

Characteristics: the central screw allows adjusting the friction inside the linear guide, while the two side screws are used for fastening. As this is a runner with reduced clearance and it is difficult to position on the profile, this adjustment has been studied in order to obtain a friction level according to the customer’s requirements (working conditions, temperatures or other). In addition, given that the runner material might not maintain the desired friction over time, this modification allows recalibration during maintenance by tightening or loosening the central screw.

Standard pack: 1 piece.

Combinations

Product Gallery

QUANTITY DISCOUNT

Qty 1+ 2+ 4+ 8+
Discounts - -10% -17% contact us
Order code Version with fastening holes Centring element for groove Weight kg Stock piece Buy Draw
4732N3000C 1 pcs yes 3.2 126,57
4732N6000C 1 pcs Yes 6.2 214,40
4732F3000C Yes Yes 3.2 148,46
4732F6000C Yes Yes 6.2 258,18
4732N3000S 1 pcs no 3.05 138,96
4732N6000S 1 pcs no 6.0 239,19
4732F3000S Yes no 3.05 160,85
4732F6000S Yes no 6.0 282,96

 Products not in stock minimum order 1 piece, delivery in 10 days (unless stock runs out).