Quality Italian Components
Handbook 2

Preassembled linear unit kit D10 with upper single carriage

LGMA

Material sliding shafts and rollers in hardened, ground and chrome-plated Cf53 steel (on request AISI431 stainless steel); profile, heads and carriage in silver-coloured anodised aluminium polyurethane belt with steel cables; galvanised steel nuts and bolts.

Technical characteristics

- Maximum carriage speed: 3 m/s*;

- Maximum carriage acceleration: 12 m/s^2*;

- Theoretical accuracy: ±0.1 mm**;

- 1 pulley turn: 200 mm.

Standard pack: 1 piece.

WARNINGS

* The maximum speed and acceleration indicated are approximate and to be checked case by case.

** the ACCURACY indicated is theoretical. The effective accuracy depends on the actual conditions of use and should take into account the accuracies of the kinematic chain - consisting of the reduction gear, motor, any connection joints - and by the performance of the position control system (encoder, etc)

Combinations

Product Gallery

QUANTITY DISCOUNT

Qty 1+ 3+
Discounts - contact us
Order code LT mm L mm C mm Cx N Cy N Cz N Mx Nm My Nm Mz Nm Weight kg Stock piece Buy Draw
LGMA210A0350 550 350 230 650 200 200 10 10 20 8.0 1.024,32
LGMA210A0400 600 400 280 650 200 200 10 10 20 8.3 1.038,11
LGMA210A0500 700 500 380 650 200 200 10 10 20 8.9 1.065,70
LGMA210A0600 800 600 480 650 200 200 10 10 20 9.6 1.093,29
LGMA210A0700 900 700 580 650 200 200 10 10 20 10.2 1.120,86
LGMA210A0800 1000 800 680 650 200 200 10 10 20 10.9 1.148,45
LGMA210A0900 1100 900 780 650 200 200 10 10 20 11.5 1.176,03
LGMA210A1000 1200 1000 880 650 200 200 10 10 20 12.2 1.203,63
LGMA210A1100 1300 1100 980 650 200 200 10 10 20 12.8 1.231,21
LGMA210A1200 1400 1200 1080 650 200 200 10 10 20 13.5 1.258,80
LGMA210A1300 1500 1300 1180 650 200 200 10 10 20 14.1 1.286,37
LGMA210A1400 1600 1400 1280 650 200 200 10 10 20 14.8 1.313,95
LGMA210A1500 1700 1500 1380 650 200 200 10 10 20 15.4 1.341,55
LGMA210A1600 1800 1600 1480 650 200 200 10 10 20 16.1 1.369,14
LGMA210A1700 1900 1700 1580 650 200 200 10 10 20 16.7 1.396,72
LGMA210A1800 2000 1800 1680 650 200 200 10 10 20 17.4 1.423,44
LGMA210A1900 2100 1900 1780 650 200 200 10 10 20 18.0 1.451,88
LGMA210A2000 2200 2000 1880 650 200 200 10 10 20 18.7 1.479,47
LGMA210A2100 2300 2100 1980 650 200 200 10 10 20 19.3 1.507,06
LGMA210A2200 2400 2200 2080 650 200 200 10 10 20 20.0 1.534,64
LGMA210A2300 2500 2300 2180 650 200 200 10 10 20 20.6 1.562,21
LGMA210A2400 2600 2400 2280 650 200 200 10 10 20 21.3 1.589,81
LGMA210A2500 2700 2500 2380 650 200 200 10 10 20 21.9 1.617,39
LGMA210A2600 2800 2600 2480 650 200 200 10 10 20 22.6 1.644,98
LGMA210A2700 2900 2700 2580 650 200 200 10 10 20 23.2 1.672,56
LGMA210A2800 3000 2800 2680 650 200 200 10 10 20 23.9 1.700,13
LGMA210A2900 3100 2900 2780 650 200 200 10 10 20 24.5 1.727,72
LGMA210A3000 3200 3000 2880 650 200 200 10 10 20 25.2 1.755,31
Customisations LT, L and C (L: min 350 mm - max 6000 mm), shafts and rollers in stainless steel

 Products not in stock minimum order 1 piece, delivery in 15 days (unless stock runs out).