Bett Sistemi will be taking a Summer break from 13/08/2018 to 26/08/2018

Quality Italian Components
Handbook 2

Preassembled linear unit kit D 10 with single right-hand side carriage

AGMA

Preassembled linear unit kit D 10 with single right-hand side carriage

Material sliding shafts and rollers in hardened, ground and chrome-plated Cf53 steel (on request AISI431 stainless steel); profile, heads and carriage in silver-coloured anodised aluminium polyurethane belt with steel cables; galvanised steel nuts and bolts.

Technical characteristics

- Maximum carriage speed: 3 m/s*;

- Maximum carriage acceleration: 12 m/s^2°;

- Theoretical accuracy: ±0.1 mm**;

- 1 pulley turn: 200 mm.

Standard pack: 1 piece.

WARNINGS

* The maximum speed and acceleration indicated are approximate and to be checked case by case.

** the ACCURACY indicated is theoretical. The effective accuracy depends on the actual conditions of use and should take into account the accuracies of the kinematic chain - consisting of the reduction gear, motor, any connection joints - and by the performance of the position control system (encoder, etc.).

Combinations

Product Gallery

QUANTITY DISCOUNT

Qty 1+ 3+
Discounts - contact us
Order code LT mm L mm C mm Cx N Cy N Cz N Mx Nm My Nm Mz Nm Weight kg Stock piece Buy Draw
AGMA210A0350 610 350 230 2000 200 200 10 20 10 8.4 1.114,45
AGMA210A0400 660 400 280 2000 200 200 10 20 10 8.7 1.129,15
AGMA210A0500 760 500 380 2000 200 200 10 20 10 9.4 1.158,61
AGMA210A0600 860 600 480 2000 200 200 10 20 10 10.0 1.188,03
AGMA210A0700 960 700 580 2000 200 200 10 20 10 10.7 1.217,49
AGMA210A0800 1060 800 680 2000 200 200 10 20 10 11.3 1.246,93
AGMA210A0900 1160 900 780 2000 200 200 10 20 10 12.0 1.276,37
AGMA210A1000 1260 1000 880 2000 200 200 10 20 10 12.6 1.305,82
AGMA210A1100 1360 1100 980 2000 200 200 10 20 10 13.3 1.335,25
AGMA210A1200 1460 1200 1080 2000 200 200 10 20 10 13.9 1.364,70
AGMA210A1300 1560 1300 1180 2000 200 200 10 20 10 14.6 1.394,14
AGMA210A1400 1660 1400 1280 2000 200 200 10 20 10 15.2 1.423,58
AGMA210A1500 1760 1500 1380 2000 200 200 10 20 10 15.9 1.453,04
AGMA210A1600 1860 1600 1480 2000 200 200 10 20 10 16.5 1.482,48
AGMA210A1700 1960 1700 1580 2000 200 200 10 20 10 17.2 1.511,92
AGMA210A1800 2060 1800 1680 2000 200 200 10 20 10 17.8 1.541,36
AGMA210A1900 2160 1900 1780 2000 200 200 10 20 10 18.5 1.570,80
AGMA210A2000 2260 2000 1880 2000 200 200 10 20 10 19.2 1.600,26
AGMA210A2100 2360 2100 1980 2000 200 200 10 20 10 19.8 1.629,70
AGMA210A2200 2460 2200 2080 2000 200 200 10 20 10 20.5 1.659,14
AGMA210A2300 2560 2300 2180 2000 200 200 10 20 10 21.1 1.688,58
AGMA210A2400 2660 2400 2280 2000 200 200 10 20 10 21.8 1.718,02
AGMA210A2500 2760 2500 2380 2000 200 200 10 20 10 22.4 1.747,47
AGMA210A2600 2860 2600 2480 2000 200 200 10 20 10 23.1 1.776,90
AGMA210A2700 2960 2700 2580 2000 200 200 10 20 10 23.7 1.806,35
AGMA210A2800 3060 2800 2680 2000 200 200 10 20 10 24.4 1.835,78
AGMA210A2900 3160 2900 2780 2000 200 200 10 20 10 25.0 1.865,23
AGMA210A3000 3260 3000 2880 2000 200 200 10 20 10 25.7 1.894,67
Customisations LT, L and C (L: min 350 mm - max 6000 mm), shafts and rollers in stainless steel

 Products not in stock minimum order 1 piece, delivery in 15 days (unless stock runs out).