Quality Italian Components
Handbook 1

Single hole with two screws with octagon hole with centring in 8mm groove

4857

Single hole with two screws with octagon hole with centring in 8mm groove

Use: connection of round or square drawn bars with new hybrid section, one screw independent of the fastening screw.

State of supply aluminium connector; UNI 5931 socket head screw; square nut with spring Part 1786 in galvanised steel, UNI 5931 socket head screw, UNI5588 hexagon nut; M6x16.5 ratchet lever in grey plastic with threaded brass pin Part 3135; Polyamide anti-rupture torque limiter.

Standard pack: 50 pieces.

Tightening torque 10 Nm (M6).

Warnings: if combined with commercial 12ø round tubes, check that the tolerance corresponds to that of our Part 2012; if combined with 10x10 square rods available on the market, check that the tolerance corresponds to that of our Part 1789.

Combinations

Product Gallery

QUANTITY DISCOUNT

Qty 50+ 100+
Discounts -17% contact us
Order code D1 Ø D1 or S T Version Finish Weight g Stock piece Buy Draw
507960 12.1 10.2 M6x12 M6x20 RH shot peening 39 12,31
507990 12.1 10.2 M6x12 M6x20 LH shot peening 39 12,31
507970 12.1 10.2 lever M6x20 RH shot peening 51 22,50
507980 12.1 10.2 lever M6x20 LH shot peening 51 22,50
Customisations of other finishes on requestp. 

 Products not in stock minimum order 50 pieces, delivery in 15 days (unless stock runs out).