Quality Italian Components
Handbook 1

Cross-type Ų50/60 reinforced

1907

Cross-type Ų50/60 reinforced

Cross type actuator

Reinforced crosstype column positioner Ø50/60

Use: position adjustable on 2 axes with worm screw for frequent adjustments.

State of supply 2 nickel-plated steel columns (electrolytic nickel-plating), trapeze screws and lead nuts in burnished steel, brass sliding bearings, 1 aluminium carriage, galvanised steel nuts and bolts.

Characteristics: Tr20 worm screw, pitch 4 (1 handwheel turn = 4 linear mm).

Positioning accuracy: ±0.3 mm/300mm*.

Operation: STEP-BY-STEP (NO continuous operation).

Max. 120 rpm; max time: 1 (min; on/off ratio=1/10 (max 10%).

Tightening torque 50Ø = 35 Nm; 60Ø = 50 Nm

Millimetre scale marking p.  .

WARNINGS

* the ACCURACY indicated is theoretical. Accuracy levels depend on the actual conditions of use and are affected by the accuracies of the kinematic chain - consisting of the handwheel/crank handle/revolution counter kit or any connection joints - and by the performance of the position control system (encoder, etc.).

Combinations

Product Gallery

QUANTITY DISCOUNT

Qty 1+ 5+ 8+ 16+
Discounts - -5% -10% contact us
Order code A mm B mm C1 mm C2 mm Colour carriages Column with millimetre scale Weight kg Stock piece Buy Draw
633533 510 510 310 310 RAL7032 grey no 12.9 552,19
633873 510 510 310 310 RAL9006 grey no 12.9 552,19
633883 510 510 310 310 grey RAL7035 no 12.9 552,19
658623 1300 510 310 310 RAL7032 grey no 20.4 715,60
658633 1300 510 310 310 RAL9006 grey no 20.4 715,60
658643 1300 510 310 310 grey RAL7035 no 20.4 715,60
 
Customisations Different carriage and pedestal colours, column stroke and length (A = max 2000 mm). Chemical nickel-plated columns p. 

 Products not in stock minimum order 1 piece, delivery in 15 days (unless stock runs out).