Quality Italian Components
Handbook 2.1

DRIVE JACK 4.5 Nm rack

4700

Use: it allows idling motion transmission - perfect for raising or lowering the rows of bottle control contact levers, suitable for low-load applications where the maximum torque required is 4.5 Nm.

State of supply Complete with reduction gear, rack, knob with torque limiter and brake.

Characteristics:

reduction gear body in reinforced polyamide 1 worm screw in phosphated steel, 1 toothed wheel in neutral polyamide , 1 rack in galvanised steel with end-of-travel stop consisting of a FRA M6x25 screw and a washer for M6 screw, 1 knob secured by means of a UNI5739 M6x12 hex head screw and washer for M6 screw and 1polyamide screw cap, 4 UNI5739 M6x55 hex head screws, 4 M6 UNI7474 self-locking nuts and washers for M6 screw. Galvanised steel nuts and bolts.

Rack axial play: 0.5 mm ÷1.0 mm

Max. rack misalignment angle:

Colours:

The orange body distinguishes the jack with torque of 4.5 Nm from the 12 Nm version (black) Part 4678.

Warning:

The brake prevents any loss of position caused by external factors (e.g. vibrations); if you use the knob for movement, the brake will not fully lock the position in order to protect the internal transmission devices.

Maintenance: not required.

Standard pack: 1 piece.

TECHNICAL DATA:

Nominal torque transmissible: 4.5 Nm (the knob with torque limiter slips when reaching 4.5 Nm, protecting the reduction gear from overloads).

Rack's travel per turn: 1 knob turn = 8 mm of rack travel.

Reduction ratio i=16 (16 knob turns -worm screw- are equivalent to 1 turn of the worm gear with hexagonal seat).

STEP-BY-STEP (NO Continuous operation).

On/off ratio=1/30

Maximum uninterrupted operation: 1 min at 60 rpm which corresponds to the complete rack travel of 470mm;

Manual drive , if motor-driven max. 60 rpm.

Combinations

Product Gallery

QUANTITY DISCOUNT

Qty 1+ 8+ 16+ 40+
Discounts - -5% -10% contact us
Code order With revolution counter L mm Lc mm Travel mm Nominal transmissible torque (Nm) Side brake Colour reduction gear body Material nuts and bolts Weight g Stock piece Buy Draw
651719 no 560 508 470 4.5 right RAL2004 orange galvanised 1495 89,44
651769 no 560 508 470 4.5 right RAL2004 orange stainless steel 1495 91,52
654079 no 560 508 470 4.5 left RAL2004 orange galvanised 1495 89,44
659389 no 560 508 470 4.5 left RAL2004 orange stainless steel 1495 91,52
Customisations On request, versions with reduction gear body in different colours, and with customisable logo, rack length and finishings are also available.

 Products not in stock minimum order: 1 piece, delivery in 10 days (unless stock runs out).