Bett Sistemi will be taking a Summer break from 13/08/2018 to 26/08/2018

Quality Italian Components
Handbook 2.1

DRIVE jack 12 Nm rack

4678

DRIVE jack  12 Nm rack

Use: holding the jack steady, it is possible to raise or lower loads fastened at the top of the rack.

On the other hand, by fastening the rack you will move the reduction gear, on which accessory support brackets or plates can be secured.

Suitable for applications where the load to be handled requires a torque of more than 4.5 Nm (limit of the version Part 4700).

State of supply complete with reduction gear, rack, knob and brake.

Characteristics:

reduction gear body in reinforced polyamide, 1 worm screw in phosphated steel, 1gearwheel in reinforced metal,1 rack in galvanised steel with end-stop composed of a UNI5739 M6x25 hex head screw and M6 screw washer, 1 knob fastened with a UNI5739 M6x12 hex head screw and M6 screw washer and 1 polyamide screw cap, 4 UNI5739 M6x55 hex head screws, 4 UNI7474 M6 self-locking nuts and M6 screw washers. Galvanised steel nuts and bolts.

Rack axial play: 0.5 mm ÷1.0 mm

Max. rack misalignment angle:

Colours:

The black body distinguishes the jack with transmissible torque of 12 Nm from the 4.5 Nm version (orange) Part 4700.

Warning:

The brake prevents any loss of position caused by external factors (e.g. vibrations); if you use the knob for movement, the brake will not fully lock the position in order to protect the internal transmission devices.

Maintenance: not required.

Standard pack: 1 piece.

Combinations

Product Gallery

QUANTITY DISCOUNT

Qty 1+ 8+ 16+ 40+
Discounts - -5% -10% contact us
Code order With revolution counter L mm Lc mm Travel mm Nominal transmissible torque (Nm) Side brake Colour reduction gear body Material nuts and bolts Weight g Stock piece Buy Draw
663629F no 560 508 470 12 right RAL9005 black galvanised 1500 97,03
663669F no 560 508 470 12 right RAL9005 black stainless steel 1500 98,80
663709F no 560 508 470 12 left RAL9005 black galvanised 1500 97,03
663749F no 560 508 470 12 left RAL9005 black stainless steel 1500 98,80
663629G ready for fitting 560 508 470 12 right RAL9005 black galvanised 1530 99,84
663669G ready for fitting 560 508 470 12 right RAL9005 black stainless steel 1530 101,92
663709G ready for fitting 560 508 470 12 left RAL9005 black galvanised 1530 99,84
663749G ready for fitting 560 508 470 12 left RAL9005 black stainless steel 1530 101,92
663629H Yes 560 508 470 12 right RAL9005 black galvanised 1575 123,76
663669H Yes 560 508 470 12 right RAL9005 black stainless steel 1575 125,84
663709H Yes 560 508 470 12 left RAL9005 black galvanised 1575 123,76
663749H Yes 560 508 470 12 left RAL9005 black stainless steel 1575 125,84
663629I no 560 508 470 12 right RAL9005 black galvanised 1500 114,40
663669I no 560 508 470 12 right RAL9005 black stainless steel 1500 116,48
663709I no 560 508 470 12 left RAL9005 black galvanised 1500 114,40
663749I no 560 508 470 12 left RAL9005 black stainless steel 1500 116,48
663629M Yes 560 508 470 12 right RAL9005 black galvanised 1575 141,44
663669M Yes 560 508 470 12 right RAL9005 black stainless steel 1575 143,52
663709M Yes 560 508 470 12 left RAL9005 black galvanised 1575 141,44
663749M Yes 560 508 470 12 left RAL9005 black stainless steel 1575 143,52
663629N no 560 508 470 12 right RAL9005 black galvanised 1500 289,12
663669N no 560 508 470 12 right RAL9005 black stainless steel 1500 291,20
663709N no 560 508 470 12 left RAL9005 black galvanised 1500 289,12
663749N no 560 508 470 12 left RAL9005 black stainless steel 1500 291,20
Customisations On request, versions with reduction gear body in different colours, with customisable logo, rack length and finishings are also available.