Bett Sistemi exhibits at Pack Expo from October 14th to 17th in Chicago, USA - Hall Uppel Lakeside/ Stand E-7826

Quality Italian Components
Handbook 2.1

3-way mini angular idler square-section

4850

3-way mini angular idler square-section

Use: it allows you to idle and synchronise motion transmission – ideal to connect format changeover bridges to each other.

State of supply 1 aluminium idler body (see Finishes on the table), 1 stainless steel shaft, 3 phosphated steel gears (see Finishes on the table), 1 UNI6364 steel cylindrical pin, 4 bearings with sliding gaskets, 1 polyurethane O-ring, galvanised steel nuts and bolts.

Reduction ratio i=1

Output angular clearance:

Characteristics: flanges may be fitted on 4 sides.

Maintenance: not required, lubricated for life.

Standard pack: 1 piece.

Operation: STEP-BY-STEP (NO continuous operation).

Max. 120 rpm with max torque of 5 Nm;

Max. 70 rpm with max torque up to 10 Nm;

Max time: 1 min; on/off ratio=1/60

Combinations

Product Gallery

QUANTITY DISCOUNT

Qty 1+ 8+ 16+ 20+
Discounts - -10% -15% contact us
Code order Shaft type A mm B mm Nominal transmissible torque (Nm) Finishing Weight g Stock piece Buy Draw
550660 X 72.5 132.5 10 RAL 9005 726.5 106,08
550700 Y 72.5 132.5 10 RAL 9005 726.5 106,08
550740 Y 38.5 98.5 10 RAL 9005 706.5 106,08
550780 Z 72.5 132.5 10 RAL 9005 736.5 106,08
550820 Z 38.5 98.5 10 RAL 9005 716.5 106,08
550860 W 72.5 132.5 10 RAL 9005 731.5 106,08
550900 W 38.5 98.5 10 RAL 9005 711.5 106,08
The table continues on the next page with shot peened versions
512130 X 72.5 132.5 10 shot peening 726.5 106,08
512150 Y 72.5 132.5 10 shot peening 726.5 106,08
512180 Y 38.5 98.5 10 shot peening 706.5 106,08
512160 Z 72.5 132.5 10 shot peening 736.5 106,08
512190 Z 38.5 98.5 10 shot peening 716.5 106,08
512170 W 72.5 132.5 10 shot peening 731.5 106,08
512140 W 38.5 98.5 10 shot peening 711.5 106,08

 Products not in stock minimum order 4 pieces, delivery in 10 days (if in stock).