Quality Italian Components
Handbook 2.1

2-way mini angular idler square-section

4687

2-way mini angular idler square-section

Use: it allows you to idle and synchronise motion transmission – ideal to connect format changeover bridges to each other.

State of supply 1 aluminium idler body (see Finishes on the table), 1 stainless steel shaft, 2 phosphated steel gears (see Finishes on the table), 1 UNI6364 steel cylindrical pins, 3 bearings with sliding gaskets, 1 polyurethane O-ring, galvanised steel nuts and bolts.

Reduction ratio i=1

Output angular clearance:

Characteristics: flanges may be fitted on 4 sides.

Maintenance: not required, lubricated for life.

Standard pack: 1 piece.

Operation: STEP-BY-STEP (NO continuous operation).

Max. 120 rpm with max torque of 5 Nm;

Max. 70 rpm with max torque up to 10 Nm;

Max time: 1 min; on/off ratio=1/60

Combinations

Product Gallery

QUANTITY DISCOUNT

Qty 1+ 8+ 16+ 20+
Discounts - -10% -15% contact us
Code order Shaft type A mm B mm Nominal torque transmissible (Nm) Finishing Weight g Stock piece Buy Draw
542090 X 72.5 132.5 10 RAL 9005 726.5 95,68
550650 Y 72.5 132.5 10 RAL 9005 726.5 95,68
550690 Y 38.5 98.5 10 RAL 9005 706.5 95,68
550730 Z 72.5 132.5 10 RAL 9005 736.5 95,68
550770 Z 38.5 98.5 10 RAL 9005 716.5 95,68
550810 W 72.5 132.5 10 RAL 9005 731.5 95,68
550850 W 38.5 98.5 10 RAL 9005 711.5 95,68
The table continues on the next page with shot peened versions
652199 X 72.5 132.5 10 shot peening 726.5 95,68
652209 Y 72.5 132.5 10 shot peening 726.5 95,68
652309 Y 38.5 98.5 10 shot peening 706.5 95,68
652229 Z 72.5 132.5 10 shot peening 736.5 95,68
652329 Z 38.5 98.5 10 shot peening 716.5 95,68
652219 W 72.5 132.5 10 shot peening 731.5 95,68
652319 W 38.5 98.5 10 shot peening 711.5 95,68

 Products not in stock minimum order 4 pieces, delivery in 10 days (if in stock).