Bett Sistemi will be taking a Summer break from 13/08/2018 to 26/08/2018

Quality Italian Components
Handbook 2.1

4-way mini angular idler square-section

4656

4-way mini angular idler square-section

Use: it allows idling and synchronising motion transmission – ideal to connect the format changeover bridges to each other.

State of supply 1 aluminium idler body (see Finishes on the table), 1 stainless steel shaft, 3 phosphated steel gears, 2 UNI6364 steel cylindrical pins, 4 bearings with sliding gaskets, 2 polyurethane O-rings, galvanised steel nuts and bolts.

Reduction ratio i=1.

Output angular clearance:

Characteristics: may be fitted with flanges on 4 sides.

Operation: STEP-BY-STEP (NO continuous operation).

Max. 120 rpm with max torque of 5 Nm.

Max. 70 rpm with torque between 5.1 and 10 Nm.

Max time: 1 min; on/off ratio=1/10 (max 10%).

Maintenance: not required, lubricated for life.

Standard pack: 1 piece.

Combinations

Product Gallery

QUANTITY DISCOUNT

Qty 1+ 8+ 16+ 20+
Discounts - -10% -15% contact us
Code order Shaft 1 type Shaft 2 type A mm B mm Nominal transmissible torque (Nm) Finishing Weight g Stock piece Buy Draw
652889 X X 72.5 170 10 RAL 9005 cataphoresis painting 736.5 106,08
652959 X X 38.5 136 10 RAL 9005 cataphoresis painting 716.5 106,08
541880 X Y 72.5 170 10 RAL 9005 cataphoresis painting 726.5 106,08
541920 X Y 38.5 136 10 RAL 9005 cataphoresis painting 706.5 106,08
541960 X Z 72.5 170 10 RAL 9005 cataphoresis painting 736.5 106,08
542000 X Z 38.5 136 10 RAL 9005 cataphoresis painting 716.5 106,08
542040 X W 72.5 170 10 RAL 9005 cataphoresis painting 731.5 106,08
542080 X W 38.5 136 10 RAL 9005 cataphoresis painting 711.5 106,08
The table continues on the next page with shot peened versions
629659 X X 72.5 170 10 shot peening 736.5 106,08
650629 X X 38.5 136 10 shot peening 716.5 106,08
650679 X Y 72.5 170 10 shot peening 726.5 106,08
650729 X Y 38.5 136 10 shot peening 706.5 106,08
650789 X Z 72.5 170 10 shot peening 736.5 106,08
650849 X Z 38.5 136 10 shot peening 716.5 106,08
650169 X W 72.5 170 10 shot peening 731.5 106,08
650229 X W 38.5 136 10 shot peening 711.5 106,08

 Products not in stock minimum order 4 pieces, delivery in 10 days (unless stock runs out).