Quality Italian Components
Handbook 2.1

2-way mini angular idler round-section with 60x62 flange

4662

2-way mini angular idler round-section  with 60x62 flange

Use: it allows idling and synchronising motion transmission – ideal to connect the format changeover bridges to each other.

Version with M6 holes on the bracket flange, which allow fastening the idler from the inside of the structure.

State of supply 1 aluminium idler body; 1 stainless steel shaft, 2 phosphated steel gears, 1 UNI6364 steel cylindrical pin, 3 bearings with sliding gaskets, 1 polyurethane O-ring, galvanised steel nuts and bolts.

Reduction ratio i=1.

Outfeed angular backlash:

Operation: STEP-BY-STEP (NO continuous operation).

Max. 120 rpm with max torque of 5 Nm.

Max. 70 rpm with torque between 5.1 and 10 Nm.

Max time: 1 min; on/off ratio=1/10 (max 10%).

Maintenance: not required, lubricated for life.

Standard pack: 1 piece.

Combinations

Product Gallery

QUANTITY DISCOUNT

Qty 1+ 8+ 16+ 20+
Discounts - -10% -15% contact us
Code order Shaft type A mm B mm Nominal torque transmissible (Nm) Finishing Weight g Stock piece Buy Draw
631639 X 73.5 131 10 shot peening 580 80,62
640879 Y 73.5 131 10 shot peening 570 80,62
631719 Y 39.5 97 10 shot peening 550 80,62
640949 Z 73.5 131 10 shot peening 580 80,62
641029 Z 39.5 97 10 shot peening 560 80,62
640999 W 73.5 131 10 shot peening 575 80,62
641129 W 39.5 97 10 shot peening 555 80,62
The table continues on the next page with black (RAL 9005) cataphoresis painted versions
541820 X 73.5 131 10 RAL 9005 580 80,62
541860 Y 73.5 131 10 RAL 9005 570 80,62
541900 Y 39.5 97 10 RAL 9005 550 80,62
541940 Z 73.5 131 10 RAL 9005 580 80,62
541980 Z 39.5 97 10 RAL 9005 560 80,62
542020 W 73.5 131 10 RAL 9005 575 80,62
542060 W 39.5 97 10 RAL 9005 555 80,62

 Products not in stock minimum order 4 pieces, delivery in 10 days (unless stock runs out).